Click to go to Members Area-  Contact info@mms15.com for password

Home  DemoIKB  IAG  Noticeboard  Reports Meetings Development IKB Contact

Other Links

Partners

 

 

bullet

Thursday 24 February 2005   Final MMS15 & MMS13 Joint IAG Meeting
 NPL

Date of next meeting

The final joint MMS13/15 IAG meeting will be held on the 24th of February 2005 at NPL.

An agenda will be sent out to members in due course. Contact Mike Gower at NPL - contact details below - for more details.

Minutes of 5th IAG

Please find click the link below to download the minutes from the 5th MMS13+15 IAG meeting held at NPL on the 15th July 2004. Please note that the final meeting will be held on Thursday 24th February 2005 at NPL. An agenda will be sent out nearer the time.

Minutes of 5th IAG 15-07-04 v1.pdf

To attend and for more details contact Mike Gower at NPL michael.gower@npl.co.uk Direct line: 020 8943 8625 who is arranging the meeting.

 Mr Mike Gower Room G9 A9, Module 9

Polymers and Biomaterials Group

Process Materials Team

Division of Engineering and Process Control

National Physical Laboratory

Hampton Road

Teddington

Middlesex

TW11 0LW

For general information on MMS13 or MMS15 Email info@mms15.com or go to www.mms15.com

Click to Download reports and presentations

 

bullet

5th Joint IAG The 5th joint MMS13/15 IAG meeting was held on the 15th of July 2004 at NPL . An agenda has been sent out to current IAG members by Email.   For minutes and presentations chaeck the MMS15 Noticeboard or www.mms15.com

bullet 4th Joint IAG The 4th joint MMS13/15 IAG meeting was held on the 15th of January 2004 at AEAT, Culham  For minutes and presentations check the MMS15 Noticeboard
bullet 3rd Joint IAG The 3rd Joint IAG was held on Thursday 10 July at NPL.  For minutes and presentations check the MMS15 Noticeboard ,
bullet

Past IAG Meetings  Previous Industrial Advisory Group (IAG) meeting of the Department of Trade and Industry (DTI) sponsored project on the development of an interactive knowledge based system for the inspection of polymer composite materials MMS15 were held at AEA Technology, Culham on  Thursday 17 October 2002 and 30 January 2003 

bullet

Join the IAG We are always interested in getting new members for the IAG including end-users, composite companies and NDE and service companies. Please contact any of the following if you would be interested in joining martin.wall@aeat.co.uk, richard.lee@aeat.co.uk mrlg@npl.co.uk .

Downloads

bullet

 

bullet LATEST NEWS      IAG Members Noticeboard  email info@mms15.com for password
bullet

Minutes and Presentations from 10 July 2003 IAG Meeting

bullet

AGENDA for 3rd MMS15/MMS13 meeting 10 July 2003 (.PDF)

bullet

Attendance List for 3rd IAG Meeting 10 July 2003

bullet

Minutes of 2nd MMS15/MMS13 IAG  January 2003

bullet

Minutes of 1st MMS15 IAG October 2002

bullet

Minutes of 1st MMS13 IAG  September 2002

bullet

Presentation 2nd IAG Task1 Codes of practice

bullet

Presentation 2nd IAG Task3 NDE

bullet

Presentation 2ndIAG MMS15IKB

bullet

Presentation Ramel Naber Brunel University

bullet

Presentation 2ndIAGInteractions.pdf


AGENDA

Measurements for Materials Systems (MMS)

MMS13 – Assessment and Criticality of Defects and Damage in Materials Systems

MMS15 – Interactive Knowledge Base (IKB) on NDE and Design of Composites

3rd Industrial Advisory Group Meeting
Thursday 10th July 2003
Meeting room CS6, Module 16, NPL

10.00 Coffee

10.30 Welcome and introduction

· Introductions

· Review of minutes from 2nd IAG meeting

10:45 Project Progress

· MMS15 – Martin Wall, Richard Lee, Gordon Bishop

· MMS13 – Mike Gower, Richard Lee, Mark Stone

13:00 Lunch

14:00 Related presentations from industrial partners

14:05 Fadhil Habib (BAE Systems) 'External threats to aircraft structures'

14:20 Sam Luke (Mouchel) 'Installation and long term monitoring of West Mill Bridge’

14:35 John Cantrill (Vosper Thornycroft) 'NDT techniques used within VT Shipbuilding'

14:50 Bob Lewin (Rolls-Royce) 'Composite engine stators'

15:05 Roger Gregory (LTI) ‘Inspection using shearography’

15:20 Discussion

15:40 AOB

15:45 Closure of meeting


ATTENDANCE

Measurements for Materials Systems (MMS)

MMS13 – Assessment and Criticality of Defects and Damage in Materials Systems

MMS15 – Interactive Knowledge Base (IKB) on NDE and Design of Composites 

3rd Industrial Advisory Group Meeting, Thursday 10th July 2003, Meeting room CS6, Module 16, NPL

 

Attendance List

 

Name

Organisation

Steve Austen

RNLI

Gordon Bishop

NetComposites

Andrew Bond Thorley

Airbus

John Cantrill

Vosper Thornycroft/Halmatic

Roger Davidson

CTG

Gordon Drummond          

Imes Ltd

Peter Frewer

Anvil Innovations Ltd

Jane Galsworthy

QuoTec

Mike Gower

NPL

Roger Gregory

LTI

Fadhil Habib

BAE Systems

Graeme Hughes

HSE

Richard Lee

AEAT

Bob Lewin

Rolls-Royce

David Lindsay

RAF St Athan

Sam Luke

Mouchel

Rod Martin

MERL

Ed Mason

Hayward Tyler

Keith McClaughlin

Advanced-Ndt

Andreas Obst

European Space Agency

Peter Padelopoulos

Anvil Innovations Ltd

Sue Panteny

Faraday Advance

Raman Patel

HSE

Peter Priest

Jaguar Racing

Amir Rezai

BAE Systems

Robert Smith

QinetiQ

Mark Stone

AEAT

Martin Wall

AEAT

 

 

 

 

 

 

 

News Headlines

Click on the headlines for the full
story

>>

Thursday 24 February 2005   Final MMS15 & MMS13 Joint IAG Meeting
 NPL

The final joint MMS13/15 IAG meeting will be held on the 24th of February 2005 at NPL. An agenda will be sent out to members in due course. Contact Mike Gower at NPL - contact details below - for more details.  NPL Map

Please find click the link below to download the minutes from the 5th MMS13+15 IAG meeting held at NPL on the 15th July 2004. Please note that the final meeting will be held on Thursday 24th February 2005 at NPL. An agenda will be sent out nearer the time. Minutes of 5th IAG 15-07-04 v1.pdf

To attend and for more details contact Mike Gower at NPL michael.gower@npl.co.uk Direct line: 020 8943 8625 who is arranging the meeting.

 Mr Mike Gower Room G9 A9, Module 9

Polymers and Biomaterials Group

Process Materials Team

Division of Engineering and Process Control

National Physical Laboratory

 

Hampton Road

Teddington

Middlesex

TW11 0LW

For general information on MMS13 or MMS15 Email info@mms15.com or go to www.mms15.com

>> Development IKB
>>

>>New website www.mms15.com

>>New IAG Members Noticeboard

>> 3rd IAG meeting for MMS15 held at NPL 10 July 2003  

>> Beta IKB accessible on NetComposites

>> Rollover menu demonstration

>> Click to see Minutes of previous IAG Meetings

 
 
 

 

 

 

   

Latest news