Measurements for Materials Systems (MMS)

MMS13 – Assessment and Criticality of Defects and Damage in Materials Systems

MMS15 – Interactive Knowledge Base (IKB) on NDE and Design of Composites

5^th  Industrial Advisory Group Meeting

Thursday 15^th July 2004

Meeting room CS6/CS7, Module 16, NPL

To Attend

If you would like to attend this meeting Please contact the MMS13 project manager Mike Gower at NPL also for more details: E-mail: michael.gower@npl.co.uk , Direct line: 020 8943 8625, Address -  Mr Mike Gower, Room G9-A9, Module 9, Polymers and Biomaterials Group, Process Materials Team, Division of Engineering and Process Control, National Physical Laboratory,Hampton Road, Teddington, Middlesex, TW11 0LW.

For general information on MMS15 or MMS13 contact the MMS15 Project manager Martin Wall of AEA Technology Engineering Solutions at info@mms15.com or telephone 0870 190 2229/2215 www.engsolve.com or the MMS15 Project manager Mike Gower, details as above.

AGENDA                          

10.00              Coffee

10.30              Welcome and introduction

•     Introductions

•     Review of minutes from 4^th IAG meeting

10:45              Project Progress

•       MMS15 – Martin Wall, Anne Birt, Gordon Bishop

•         MMS13 – Mike Gower, Richard Lee, Mark Stone, Rod Martin

13:00              Lunch

14:00              Performance Programme (2004-2007)

•      Project B3: A Tool to Predict Lifetime for Composites Subjected to Environmental/Fatigue Damage
                   – Nick McCormick

•     Project F4: Accelerated Ageing Protocol for Service of Polymer Materials in Hostile Conditions – Graham Sims

•     Project F12: Development of Test Methods for Determining the Criticality of Defects in Composite Material
      Systems Under Long-Term Loading – Mike Gower

15:00              2004/2005 Materials Interim Programme – Graham Sims

15:30              Discussion

15:45              AOB

15:50              Closure of meeting